radial piston pump

英 [ˈreɪdiəl ˈpɪstən pʌmp] 美 [ˈreɪdiəl ˈpɪstən pʌmp]

网络  径向柱塞泵; 径向活塞泵

化学



双语例句

  1. Numerical Simulation and Research of Radial Piston Pump Slipper Pair Internal Flow Field
    径向柱塞泵滑靴副流场数值模拟与研究
  2. Determining the Slip-boots Structural Parameter of the High Pressure Radial Piston Pump
    高压径向柱塞泵中滑靴结构参数的确定
  3. Research on the Acceleration Vibration Characteristics of Stator of Constant-Pressure Radial Piston Pump
    恒压式径向柱塞泵定子加速度振动特性研究
  4. Analysis on the Vibration of Stator of Radial Piston Pump on the Mode of Constant Flow and Pressure in Time and Frequency Domain
    恒流恒压状态下径向柱塞泵定子振动时频域特性分析
  5. Volumetric efficiency and structure design to certain radial piston pump with axial flow distribution The Research on Annual Runoff Prediction and Optimal Allocation of Water Model in the Irrigation Area
    某型轴配流径向柱塞泵容积效率分析灌区年径流量预测与灌区优化配水研究
  6. Development and capability of a radial piston pump for heavy oil transportation
    一种用于稠油输送的径向活塞泵的研制
  7. Application of Virtual Instrument in Radial Piston Pump Stator Vibration Testing System
    虚拟仪器在径向柱塞泵定子振动测试中的应用
  8. Research on Integral Project of Digital Control System Used for Radial Piston Pump
    数字控制径向柱塞泵整体方案的研究
  9. The principle of hydrostatic pressure bearing is introduced in the paper, the sliding boot of radial piston pump is designed by using principle of hydrostatic pressure bearing.
    本文导出在压差流和剪切流作用下的轴向柱塞马达中连杆滑靴与斜盘摩擦副温升的计算,为防止摩擦副烧损和合理设计摩擦副提供了依据。
  10. The New Machining Process Method of Radial Piston Pump Slippery Boots
    径向柱塞泵滑靴机加工工艺的新方法
  11. Analysis and improvement of the friction couple leakage of the new type radial piston pump
    新型径向柱塞泵摩擦副泄漏原因分析与改进
  12. A new control method for the electro-hydraulic proportional radial piston pump controlling system was adopted. And three valves were designed.
    对电液比例变量径向柱塞泵系统采用了新的控制方法,为此专门设计了流量控制阀、压力调节阀和负载敏感阀。
  13. Research for Clearance between Oil Distribution Axle and Rotor of JBP 40 Radial Piston Pump
    JBP40径向柱塞泵配油轴与转子配合间隙的研究
  14. Design and Research on the Lower Noise Radial Piston Pump
    低噪声径向柱塞泵的设计与研究
  15. Design and study of TDB radial piston pump
    TDB径向柱塞泵的设计与研究&柱塞副两个基本公式的导出
  16. The study shows this is a type of lower noise radial piston pump.
    研究表明此泵是一种低噪声径向柱塞泵。
  17. The paper analyzes and studies the moring mechanism and movement rule of radial piston pump with boot slider.
    对滑靴式径向柱塞泵运动机构和运动规律进行了分析研究。
  18. Taking the electro-hydraulically, proportionally controlled radial piston pump JBP-63 as an investigation objective, the concrete modeling course of hydraulic system was discussed.
    以JBP-63型电液比例控制负载传感变量径向柱塞泵为研究对象,讨论了具体液压系统的建模过程。
  19. A Horizontal Radial Piston Pump of Variable Displacement with Valve
    一种用阀控实现变量的卧式径向柱塞泵
  20. The Design of Radial Piston Pump with Hydrostatic Pressure Bearing Sliding Boot
    径向柱塞泵滑靴静压支承的设计
  21. Dynamic Simulation of a Flat Valve Type Radial Piston Pump
    阀配流式径向柱塞泵动态性能的仿真研究
  22. Aimed at electro-hydraulic servo controlling radial piston pump, self-adapting fuzzy PID controller was designed. Simulated with computer, system responses tracking step signal were reproduced.
    针对电液伺服控制径向柱塞变量泵变量机构,设计了模糊自整定PID控制器,并通过计算机仿真,再现了系统跟踪阶跃信号的系统响应。
  23. The radial piston pump can adopt manual-control or electro-hydraulic proportional control to realize the control of constant flow, constant pressure, constant power and load sensitivity etc.
    径向柱塞变量泵可以采用手动控制、电液比例控制或负载敏感控制等多种控制方式,实现恒流量、恒压力、恒功率的控制。
  24. Efficiency Analysis of High Pressure Radial Piston Pump with One Oil Distributing Valve
    单配油阀高压径向柱塞泵容积效率分析
  25. Investigation of the Minimal Oil Film between Radial Piston Pump's Stator and Roller
    径向柱塞泵定子与滚柱间最小油膜厚度研究
  26. The final step is to establish the parameters of the radial piston pump system.
    最后就是建立径向柱塞泵的参数化系统,实现参数化功能。
  27. The new variable radial piston pump researched in this paper is a kind of new energy-efficient hydraulic power components.
    本文所研究的新型变量径向柱塞泵是一种高效节能的新型液压动力元件。
  28. In this paper, the electro-hydraulic proportional radial piston pump and its system designed by author is mainly discussed, this pump is wanted to be used in the hydraulic system of the plastic injection molding machine.
    本论文介绍了作者对注塑机用电液比例径向柱塞泵及其系统研究的成果。
  29. Optimized structure, hydraulic radial piston pump valve orifice system response characteristics to improve, reduce the amount of leakage, the volumetric efficiency increases, pump output flow rate increases, and the output traffic flow pulsation attenuation.
    优化后的参数,水压径向柱塞泵阀配流系统的响应特性提高,泄露量减少,容积效率增大,泵的输出流量增大,且输出流量的流量脉动得到了衰减。